Drop Office Meeting Chair

Drop Office Meeting Chair is constructed on a single-piece monoblock wooden frame. Since the body structure has no connection points, potential loosening or deformation over time is prevented. The entire wooden frame is covered with cut foam, providing balanced fullness across both the seating and backrest surfaces.

During the upholstery stage, synthetic leather is used, and symmetrical stitching is applied across the surface. This method prevents waviness on the chair surface and ensures clean, well-defined lines. Color selection is determined by user preference; alternatives compatible with the meeting room’s table, cabinets, and flooring tones can be applied during production.

The armrests are made of polished wood, and their upper sections are upholstered with the same leather used on the main body of the chair. This eliminates any feeling of hardness during elbow contact. The wooden legs are finished in the same polish tone to maintain visual continuity with the chair’s body.

In the meeting model, a double-layer foam structure is placed in the seating area. This construction prevents pressure from concentrating on a single point during long sitting periods and gives the chair’s side profile a fuller appearance.

Drop Office Meeting Chair – Mechanism Features

A dual-lever mechanism is used in the lower structure. This system allows the backrest to recline backward in a controlled manner. Thanks to the locking points on the mechanism, the chair can be fixed at the desired angle.

Height adjustment is carried out via a gas lift system. The seating height can be adjusted according to desk height or the user’s stature. No sudden drops or harsh rises occur during movement; transitions are smooth and balanced.

This structure helps support the lower back and spine when sitting for extended periods around a meeting table. Since the mechanism is centrally positioned, there is no sensation of tilting to the right or left when leaning back.

Drop Office Meeting Chair – Dimensions and User Experience

Product dimensions are determined with meeting areas in mind:

Width: 65 cm

Depth: 65 cm

These dimensions allow the chair to be moved comfortably around the table without narrowing circulation spaces when arranged side by side.

The cut foam used in the seating surface ensures even weight distribution. Foam density in the backrest is adjusted to support the middle section of the spine. No hard contact points occur at head or shoulder level.

The contact points of the wooden legs with the floor are fixed; the chair does not shift unless intentionally moved. Armrest height is aligned parallel to the tabletop, helping maintain proper arm positioning while writing or reviewing documents.

This model is classified as an individual task chair.